What are you shooting for 2005

[skip]

Just curious what everyone will be shooting for 2005.

Looks like it will be an Ovation indoors for me and The jury is out on the 3d bow, thinking about shooting the Icon for '05 (unless Mathews has a neat shooter at the ATA show...

[dkoutdoors]

I will be shooting for Storm Archery, I will be shooting the Storm F-28E

[MidMoArcher]

I haven't made up my mind yet but it is either the PSE Primos or the Mach Pro.

[skip]

The Primos with the hybrid cam should make good speed, and its got great brace ht...

Sounds like a good choice....

[jaydse]

I think I'll be shooting my ovation for a long time getting piece by piece for 3-D. put a long stablizer on feels like a different bow! fall forward so smooth I can't belive it! Got a dozen FATBOYS I'm almost ready saveing up for a new site!

[xring]

For indoors I have a Merlin Supernova with the Omega cam on the way. Can't wait to get it. :lol:

[dkoutdoors]

Sounds like there are going to be some good set-ups out there this year, Good luck to you all this season.

[AKDoug]

Newberry LB1 for me indoors and field. A Newberry B1 for 3D.

[ldfalks]

McPherson Edge for Hunting and McPherson Bishop for indoor and 3-D. :D

Look out...Team Pearson/McPherson is rocking this year. 8) :)

[lterry]

I'll be shooting a Storm. Enjoy the season.

[PB30X]

Just curious what everyone will be shooting for 2005.

Looks like it will be an Ovation indoors for me and The jury is out on the 3d bow, thinking about shooting the Icon for '05 (unless Mathews has a neat shooter at the ATA show...

I think I'm in the same boat. As for the Mathews C-Apex, and Switchback I will not be able to test drive until around Christmas. I'm hoping they have something more for the target department come January. I'm a Spottie, so I guess it's the only preference I have for now, until then we shall see........No hurry!

[Droptine]

I will be shooting a Ultraelite.

[brent stl]

03' PSE Primos STL. I'd like a Scorpion, but now I'll wait and see what the hybrids are like. No archery clubs within an hour of me, so I compete against myself a lot. Upside, I always win. Downside, I always lose...

[tekr]

I was going to get a new bow this year for 3D But I just might be shooting the old trusty Protec again. I just dont see anything yet to take the place of it.

Brent, I am in SE Missouri, there will be a lot of 3D shoots down this way starting around Feb. If you are interested in them let me know.

[ebutler79]

Going to be shooting the new target bow Bill and the boys are putting out.
Cant wait to get it ordered and tuned.

[ldfalks]

Going to be shooting the new target bow Bill and the boys are putting out.
Cant wait to get it ordered and tuned.
Are you talking about the Bishop? That is one sweet bow. I shot it a couple of weeks ago and mine is already ordered!!!

[ALASKA MIKE]

since I ordered the mathews conquest apex, I will probably be shooting that for indoors, so I can get the feel for it-- for outdoor target( I ordered it for long distance target shooting. But it might make me buy another for indoor shooting also.

the new mathews recurve that comes out in January(so I heard anyway)(this bow was to be released around the olympics, then they decided to release it at the ata show)it has been a long time since shooting with fingers seriosly, so this will be very challenging and fun to do(but in order to make the time for this new style, I will have to hang up the 3d bow for awhile, but I am ok with that.

but if the apex does not turn out to shoot better than my mathews conquest's, I will be forced to shoot my 3 beautiful conquest 2's!!!

ALASKA MIKE

[RobertM]

Don't know yet. Ain't seen what ever one's got for 2005.

[Ahti]

I have my Bowtech pro 40. I'm maybe going to buy Mathews before the summer :)

[LHpuncher]

shooting my pearson freedom pro for indoors...... the new mcpherson competition for 3D

[vipper]

IT WILL BE ONE OF THE NEW PEARSONS FOR SURE! :lol:

[Big Country]

I`ll be using a new ProTec with XT2000 limbs and spiral cams for hunting.

For 3-D a new Pro-Elite with XT3000 and Spiral cams.

For field and indoor my 2004 Pro-elite with XT3000 and regular cam 1/2.

[jpo]

Mathews LX for FITA, field and 3D :D

[12x]

I'm still waiting to see whats coming out, still nothing that's been released so for has grabbed my attention

[Jimmy]

Choosing atm between Mathews Outback, Switchback and Bowtech Extreme VFT, Mighty Mite VFT, Patriot VFT .. Can´t really decide yet :?
Any tips?

[timppa]

Merlin MAX3000 and Merlin Elite riser + Samick Extreme limbs. :lol:

[pinshooter]

Browning Oasis but I did take a hard look at the Mach 12.

[dudley152]

I'm sticking with my Bowtech Liberty.

[Carroll in MO]

I will be shooting last years Martin Scepter III with nitrous cams for everything.
Carroll :D

[SPECTRE]

I'll be shooting an Old Glory with the new Equalizer Binary Cam system 8)

For 3D anywho...... Indoors it'll probably be the Old Glory as well...... when I try to switch back and forth the game goes in the toilet...... :x


I figured all the Mathews brass would be shooting the Apex

[mo_bowhunter]

Any of those shoots down in SE Missouri, post them on here. I am always looking for more shoots to go to.

Thanks

[Panzer]

Right now I'm shooting a BowTech Pro38 and love it to death so when I get back to the states I'm probably gonna buy a Pro40 for all things target. At least until I can talk Mrs. Panzer into letting my fork out some more cash for a indoor bow that is.

I'll be using my '03 Magnatec for hunting.

[Jari]

Right now i have Hoyt Protec XT 2000 spiral & ½ cam 60#
but are waiting fore new Protec XT 3000 60# Blufusion cam & ½ :)

//Jari 8)

[3dmama]

right now I am shooting a LX for everything. My new coach wants me to shoot an ovation for indoors, so I guess I will order one January 1st. Then I am going to wait till the ATA show and see what else Mathews has for 3d. With my new and improved draw length I should have lots of options. :D

[GAJBIRD]

can't make up my mind
Conquest apex
Martin Shadowcat
Pro elite
Who knows maybe santa will decide for me.lol
Thanks, Jay

[Preacher]

I'm not much into "Bells and Whistles" and I figure if it ain't brioke, don't fix it. :D So I'll probably be shooting my old MQ-1's.:)

[rcher54]

:D A concept "99" of course! Can't wait untill the the concept Mono Bow is out! 8) :D

[Bobmuley]

Well, I've ordered an '05 Protec, with spirals on the ends of some XT3000s. Hopefully I can shoot it before the new year!

[ochoytman]

ultratec 3000 spirals, protec 2000 spirals, and xtec cam1/2 8)

[LA Archer]

As of right now I will be shooting my '04 Ultra Tec xt 3000's and spiral cams. However I am looking at the Martin Shadow Cat, Hoyt Proelite, PSE Mach Pro, and Mach 12 hybrid. My problem is there is not anywhere around here to try these out.

[Dave2]

Picked up a nice Mathews C2 in Root Beer this winter, gone to start out the 3d season with that.

[MikeK]

For indoors I have a Merlin Supernova with the Omega cam on the way. Can't wait to get it. :lol:
You're gonna love it! :wink:

[Archeryaddict]

Do I have to say it or is it obvious enough 8)

[AKDoug]

You like that little avatar I made up last year, don't ya' :wink:

[Archeryaddict]

You like that little avatar I made up last year, don't ya' :wink:

You Betcha!
Easier for me to use yours than to make my own that would probably look Just like yours :lol:

[AKDoug]

LOL.. I got the correct font for the Newberry Logo last week from Rebecca. I'm working on a new and improved version.

[Archeryaddict]

Cool
you wouldnt mind me sharing it with you when you get it finished would you?
Seeing we are on the same team and all :shock:

[Javelina]

Hoyt.... :P

[DUBBYA ARE]

Hoyt.... :P

JAVELINA....I was thinking I might just give one of those Hoyts a try this year :wink: ...Camo??...3000 limbs??...UltraTec??...half a cam + one??. :? :D ....WR

[Javelina]

Hoyt.... :P

JAVELINA....I was thinking I might just give one of those Hoyts a try this year :wink: ...Camo??...3000 limbs??...UltraTec??...half a cam + one??. :? :D ....WR

UltraTec '05 XT3000 Spirals... Camo... for hunting

UltraElite LxPro limbs cam & 1/2 field & indoors

[SageCreek]

I have a stable full of Ovations that is shooting lights out! :D

I'll be using those allot.

I will be getting a Switchback for hunting.

Can't wait to see the next two bows from Mathews in Jan.

I would like test drive a few others to review them a bit.

[soundman]

browning oasis

[Jeff in SC]

'04 Hoyt XTect :D

[arrowman]

Bowtech mightymite :P

[Cyberone]

I'll be shooting the best bow I have ever shot. Richwood/CSS Challenger.

[Archeryaddict]

I will soon be shooting one of these
the Newest Newberry 8)


[/url]http://www.hunt101.com/img/221983.gif ([url]http://www.hunt101.com/?p=221983&c=500&z=1)

[pdq 5oh]

BowTech Old Glory for 3D. A Defender for hunting. Of Course I'll keep my Liberty and P40 Dually, just in case.

[hooked22]

Nothing fancy like most of you guys. Indoors Darton Maverick Extreme 50-60 lbs. Toxonics Elite w/ 3x Willet scope . Haven't pick out a rest yet. GT Ultra lites. Any tips on a good rest for spots ???. Hunting: Darton Maverick Extreme 60-70 lbs. Toxonics Top Gun M 38. Simms stabilizer , Trap Door Pro rest, GT XT 5575.

[Archery1st]

Got to be the best bows out there...CSS all the way

Encore or Challenger, but they will be at my side all the way :)

[BOW5]

ProElite XT3000's and spirals

[MOBUCK]

Same bows I've shot for the last 2 years :roll:

They shoot better then I can anyway..............so why change :wink:

I can always shoot DUBBYA ARE'S new bow PDT_Armataz_01_37

[silver mallard]

CSS Challenger for me. I waiting to see what Chuck and Crew are dreaming up for 2005.

[SageCreek]

Same bows I've shot for the last 2 years :roll:

They shoot better then I can anyway..............so why change :wink:

I can always shoot DUBBYA ARE'S new bow PDT_Armataz_01_37

Hey Mo Bee, glad you made it over here to the Big Leagues!

[UltraShooter]

2004 Hoyt UltraElite--XT3000 limbs/Cam & 1/2

[akafanatic]

I will be shooting my PSE Predator more then likely, however the new Shark is an option. Whatever i shoot it's gonna have to have a long axle to axle so it doesn't pinch my fat fingers :D

[thndrr]

A 2004 X-tec for me, sure would like one of those new Bowtech's though :wink:

[28lx]

I think I will stick with my LX's for this year. PDT_Armataz_01_36

[Crusher]

I am going from Mathews Q2XL to a Hoyt Ultra Elite...I can't wait. I picked up about 30 fps in the switch. :D

[Matt / PA]

2 of the new "Equalizer" cam BowTech models.

A 30"/60# "Old Glory" for 3D

30/70# "Allegiance" for next hunting season.

[niteshade]

Allegiance by bowtech :D

[Ivorytooth]

My Con3 in Blueberry just like last year.

[Old Glory]

Old Glory for me. 27.5 draw 50lbs. Pewter

[Jim C]

Indoors-Martin Aurora at 69 inches
Field-Hoyt Matrix with G3 limbs
FITA-either a Hoyt or a sky conquest

[Dave2]

Have another Conquest 2 being shipped to me now, this one is blue with the minimax system on it, will have some fun trying this one out, will use it for a backup.

[Sagittarius]

Hello Skip and everyone else. 8)
Glad to see your site is going again, Skip
Still shooting my Accu-Riser II's and my Super Nova for target.
May get a new hunting bow for 2005 but don't know for sure what I would want at this time.


Sag.

[SageCreek]

Sag ole buddy,

I think you owe it to yourself to shoot a Switchback in 05 for hunting. :wink:

[ArkBear]

Black Widow; Bob Lee

[fireguy]

Lets see..
for hunting my 03 Martin Phantom II
for spots a 04 Blue Razor X NOSX
and for 3D a brand new Martin Cougar III NOS


Ken

[1tex3d]

05 Pro-Elite xt2000 spirals Safari colored target and 3-d

05 Pro-tec xt2000 spirals safari colored for hunting

[limbhanger36]

I will be proudly carrying the New McPherson Bishop to the stakes this spring. Gotta stay with the Edge for the stand it may very well be the ultimate huntin rig.

[skip]

Hanger you and Dee are going to be wearing it out this year with the McPherson's

Awesome shooters from what Dee has told me....

[whiteshoes]

Hunting 04 Hoyt Xtec cam and 1/2 XT1000 limbs - 3D 04 Hoyt Ultra tec cam and 1/2 XT2000

[4X-24 BOB]

Conquest 3 Indoor fingers , CSS System indoor release , Hamilton Classic longbow for 3D. :x_cool:

[Jorge]

Hoyt ProTec LX 2001, quite new for me (after retiring a some 15 yrs PSE). :) for indoors, fingers.

Old Check It target sight, 1"scope, 2X ground lens, fiber pin.
Rest still undefined, testing GKF SuperStar.
30" K&K carbon stab.
E Bateman 2 under cordovan tabs.

Easton Epics arrows for practice, GT 22 UL Pro for serious shooting.

[3-D Mountaineer]

05 Bowtech Old Glory-05 Bowtech Constitution maybe 05 PSE Mach Pro Hybrid or Hoyt ProElite XT2000.

[OregonArcher]

for 3D/Hunting ill be shooting a Mathews Switchback at 27/70 w/ Winners Choice string/cable, Spot Hogg Real Deal, Trophy Ridge Dropzone, Doinker 10.5 Multi Rod.

for indoor ill be setting up my AR34 at 27/60 w/ Winners Choice string/cable, GKF TKO w/ a blade launcher. thats as far as ive gotten on my setup for that so far. still trying to decide on how i want to proceed with that venture as im not much of a spottie.

[qualitymilk1]

CP Oneida Pro Eagle for 3D and indoor. CPO Black Eagle for hunting.

[Erbowman]

Hoyt Protec xt2000 limbs cam.5 for indoors
Hoyt Protec xt2000 limbs spirals for 3d

[PSE Archer]

PSE Mach Pro NRG Hybrid!!

[Hollowpoint10]

Martin RazorX(s), 72#'s for outdoor, and 64#'s for indoor. Both have Elite limbs, Nitrous cams, TR dropzones, and Easton ACE stabs.
I am going to try a scope this year....and still shootin' fingers.

[Francis]

Jon

why did you give up your martin nitrous x bow to shoot a merlin?

Merlin is awesome as well, just curious why you wouldnt have your martin as one of your bows still?

[Pinwheel 12]

Merlin Supernova for spots, Max 3000 for 3D, and Max Xtreme for hunting. Merlin all the way. :grin:

[Bruce Archer]

CSS Contender for me! Combined with the new Carbon Express Linejammer 250s gives me a sweet combination!

[dreygo]

Indoor:

04 ProTec with LX Pro limbs
Sure-loc sight with cosmic impact fiber optic 4x scope
Kyber systems 32 x 1.5 stabilizer
Cascade thumb relax release

[Just a Guy]

For indoors i am shooting my trusty Scepter III and for 3-D and hunting i am shooting a Darton Maverick.

[Shawnee Archer]

Just bought a new Martin Shadow Cat Elite that I will shoot for Hunting and 3D. It is an excellent shooting bow. I also will be shooting a Martin Hatfield Takedown and a Howard Hill Longbow.

[grandpawrichard]

For my hunting and 3D needs I'm shooting a Newberry LB1 : http://www.hunt101.com/img/241833.jpg or a Newberry SB1. For my Spot bows I'll be using my Newberry's plus I'll also be using my tried and true PSE Mach-11's. It's pretty hard to beat those old Mach-11 bows for looks, feel and accuracy! http://www.hunt101.com/img/241844.JPG Besides that, Newberry hasn't come out with Target colored bows yet! :(

Dick

[Pinwheel]

This is my bow from last year Newberry B1! I will be shooting the Sabre for this year!

[LX_Shooter™]

Ovation for 3-D
OutBack for hunting

[Jerry]

After shooting the Bowtech Allegiance my good friend loaned me, I will be getting one.......what an awesome bow !

[MissTy]

3D- Martin ShadowCat
indoor- Martin Razor X
Hunting- Martin Cougar III

[Arrowsmith]

Hoyt Pro Elite for 3d and Indoor
Hoyt VTEC for hunting

[JC280]

For 3D and Indoor I will be using the Bowtech Constitution. My hunting bow will consist of an Old Glory. Both bows will of course have the Equalizer Binary Cam system.

Jonathan

[Tincup]

Equalizer* Binary Cam System* */Allegiance or Defender* :D* * * BOWTECH* FOR* * 2005* !!!!!!!

[Erbowman]

Indoors=Hoyt protec xt2000 limbs cam.5 56 lbs
NFAA=hoyt protec same as above
3d =hoyt protec xt2000 limbs spiral cams

[justout]

For 3D my Conquest 3 and for hunting my trusty Q2. Both set at 64lbs