Allegiance, Cams leaning

[larcher]

I didn't use my Bowtech Allegiance for a long time. Yesterday, the string of my LX broke and I decided to use my Allegiance.
I down graded it from 90 to about 75lbs and tuned it after changing the rest and the sight.
Paper tuning is OK but no accuracy.
2 problems :
1) both cams are leaning badly on the right.
2) almost no valley and let off should be very low as I have to struggle to not to creep.
Are there solutions?
thanks

[Tater1985]

The cams on an Ally will lean noticably. As far as the non existant vally, is there room to move your draw stop out? It will not take much, I recommend asking for help at a local shop if you are unfamiliar with this.